[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[nsp] RE: T3/E3 module for 26xx/36xx



Does anyone have experience of using the NM-1T3/E3 on a 3725? I'd be
interested to hear throughput results. It's either this or a 7204VXR as I
need somewhere near to the full line-rate.

Cheers,

Iwan

> -----Original Message-----
> From: Thomas Kernen [mailto:tkernen@deckpoint.ch]
> Sent: 22 November 2002 07:18
> To: cisco-nsp@puck.nether.net
> Subject: T3/E3 module for 26xx/36xx
> 
> 
> 
> Since this has been a recurring question on the list over the 
> year (ie:
> what's the best way to connect a 26xx/36xx to a T3/E3 circuit) well I
> thought I would drop a quick line since I discovered that 
> Cisco are now
> producing a T3/E3 Network Module for the 26xx/36xx series: NM-1T3/E3
> 
> Please note that is does require one of the newer 26xx/36xx:
> Cisco 2650 and 51XM
> Cisco 2691
> Cisco 3660
> Cisco 3725
> Cisco 3745
> 
> Thomas
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/