[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

I-D ACTION:draft-mannie-ccamp-gmpls-sonet-sdh-ospf-isis-01.txt

A New Internet-Draft is available from the on-line Internet-Drafts directories.

	Title		: GMPLS Extensions to OSPF and IS-IS for SONET/SDH 
	Author(s)	: E. Mannie, D. Papadimitriou
	Filename	: draft-mannie-ccamp-gmpls-sonet-sdh-ospf-isis-01.txt
	Pages		: 15
	Date		: 02-Jul-02
This document introduces some of the extensions required in existing
IGP routing protocols to support sub-sequent signalling for
dynamically established SONET/SDH circuits using GMPLS-based control
plane architecture [GMPLS-ARCH]. In particular, it specifies the
GMPLS routing extensions to OSPF and IS-IS routing protocols for
SONET/SDH networks using [GMPLS-RTG] as guideline.
The current document is based on the Traffic Engineering (TE)
extensions defined in [OSPF-TE] and [ISIS-TE]. It supports link
bundling (aka TE Links) as defined in [MPLS-BDL]. This document
proposes several new sub-TLVs for SONET/SDH network control which
complement those proposed in [GMPLS-OSPF] and [GMPLS-ISIS]. The
proposed encoding does not preclude any further integration in these
documents that the current one intends to complement.

A URL for this Internet-Draft is:

To remove yourself from the IETF Announcement list, send a message to 
ietf-announce-request with the word unsubscribe in the body of the message.

Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-mannie-ccamp-gmpls-sonet-sdh-ospf-isis-01.txt".

A list of Internet-Drafts directories can be found in
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt

Internet-Drafts can also be obtained by e-mail.

Send a message to:
In the body type:
	"FILE /internet-drafts/draft-mannie-ccamp-gmpls-sonet-sdh-ospf-isis-01.txt".
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the