[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

I-D ACTION:draft-jones-cable-gateway-tools-mib-01.txt



A New Internet-Draft is available from the on-line Internet-Drafts directories.


	Title		: Cable Gateway Tools Management Information Base 
                          for CableHome compliant Residential Gateways
	Author(s)	: D. Jones et al.
	Filename	: draft-jones-cable-gateway-tools-mib-01.txt
	Pages		: 19
	Date		: 2003-1-27
	
This memo defines a portion of the Management Information Base (MIB)  
for use with network management protocols in the Internet community.
In particular, it defines a basic set of managed objects for SNMP-
based management of CableHome compliant WAN Gateway Devices and home
routers.  Specifically, this MIB defines managed objects for both a
connection speed tool and an ICMP 'ping' tool between the Gateway and 
devices on the LAN.
This memo specifies a MIB module in a manner that is compliant to the
SNMP SMIv2.  The set of objects is consistent with the SNMP
framework and existing SNMP standards.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-jones-cable-gateway-tools-mib-01.txt

To remove yourself from the IETF Announcement list, send a message to 
ietf-announce-request with the word unsubscribe in the body of the message.

Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-jones-cable-gateway-tools-mib-01.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-jones-cable-gateway-tools-mib-01.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
<ftp://ftp.ietf.org/internet-drafts/draft-jones-cable-gateway-tools-mib-01.txt>